Operation pH 3310
58
ba75802e02 12/2008
4.6.2 Connecting a PC
Connect the pH 3310 to the PC via the USB interface.
Warning
The USB interface is not galvanically isolated.
When a grounded PC is connected, measurements cannot be
performed in grounded media as incorrect values would result.
Installation of the USB
driver on the PC
System requirements of the PC for installation of the USB driver:
z PC with Pentium processor or higher with at least one free USB
connection and CD-ROM drive
z Windows 2000, XP, Vista.
1 Insert the supplied installation CD in the CD drive of your PC.
2 Install the USB driver on the PC.
Follow the Windows installation instructions as necessary.
3 Connect the pH 3310 to the PC via the USB interface.
The meter is listed as a virtual COM interface among the
connections in the Windows instrument manager.
To Next Page
Loading...
