wtw pH 3310 - Sensor-Independent Settings; System

Operation pH 3310
24
ba75802e02 12/2008
4.3 Sensor-independent settings
The Storage & config menu comprises the following settings:
z System (see section 4.3.1).
z Data storage (see section 4.3.1)
4.3.1 System
Overview The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
z Menu language
z Beep on keystroke
z Illumination
z Display contrast
z Interval of the automatic switch-off
z Data interface
z Clock and date function
z Reset of all sensor-independent system settings to the default
condition
Settings To open the Storage & config menu, press the <F1
_>/[Menu] or
<ENTER>key in the measured value display. After completing the
settings, switch to the measured value display with <M>.
Menu item Setting Description
System / General /
Language
Deutsch
English
(further)
Select the menu language
System / General /
Beep
On
Off
Switch on/off the beep on
keystroke
System / General /
Illumination
Auto
On
Off
Switching the display
illumination on/off
System / General /
Contrast
0 ... 100 % Changing the display
contrast
System / General /
Switchoff time
10 min ... 24 h Adjust the switch-off time
System / Interface /
Baud rate
1200, 2400,
4800, 9600,
19200
Baud rate of the data
interface