X-Rite Ci62L+RTL User Manual

CI62L+RTL SPECTROPHOTOMETER
25
3. Tap the Select button to change to the Measure Standard screen.
4. Measure the standard.
Tapping the Select button with the Standard/Sample icon highlighted will toggle the
measurement screen between Measure Standard and Measure Sample.
Saving a Standard
1. Tap the Right navigation button to highlight the Progress column.
2. Use the Up or Down navigation buttons to select the Save Standard icon
.
3. Tap the Select button to open the confirm screen to save the standard.
4. Tap the Right navigation button and highlight the Checkmark icon
in the Progress
Column.
5. Tap the Select button to save the standard. By default, a saved standard is named “Standard”
with the next available number (e.g., Standard1, Standard2, etc.).
NOTE: To exit the without saving, highlight the Exit
icon in the Progress Column and tap the
Select button.
Save standard icon (only appears
after a standard measurement)

X-Rite Ci62L+RTL Specifications

General

Brand	X-Rite
Model	Ci62L+RTL
Category	Measuring Instruments
Language	English