XEROX WIDE FORMAT COPY SYSTEM Cleaning and maintenance - Scanner • 137
Cleaning and maintenance -
Scanner
Cleaning and maintenance - Scanner
For the Scanner to do its best job, the Platen Glass, Document Drive
Rolls, Backer Roll, Calibration Strip, and Document Feed Tray must be
kept clean. This requires some daily and monthly cleaning and
maintenance activities.
Daily activities
Clean the Platen Glass, Document Drive Rolls, and Backer Roll. See the
"Cleaning the Platen Glass and Document Drive Rolls" section on the
next page.
Inspect the Document Feed Tray and clean as required.
Monthly activities
Clean the Calibration Strip. See the "Cleaning the Calibration Strip"
section on the next page.
Inspect the Platen Glass for chips and scratches.
If the Platen Glass is chipped or scratched, and these defects are visible
in the scanned images, call XEROX service.
The following illustration depicts the Scanner components that require
cleaning.
To Next Page
Loading...
Need help?
General