LLooaaddiinngg PPaappeerr iinn tthhee BByyppaassss TTrraayy
The bypass tray holds a maximum of 100 sheets.
To load paper in the bypass tray:
1. Open the bypass tray.
Note: If the bypass tray is open and loaded with paper, remove any paper that is a
different size or type.
a. To open the bypass tray, press the release lever.
b. Fully extend the bypass tray.
2. Move out the length and width paper guides, then press down the metal plate near the feed area.
Note: The metal plate is part of the tray near the feeder roll.
Xerox
®
B1025 Multifunction Printer
User Guide
113
Paper and Media
To Next Page
Loading...
