Maintenance Safety
Do not carry out any maintenance on this product that is not described in the customer documentation.
CCAAUUTTIIOONN——PPOOTTEENNTTIIAALL IINNJJUURRYY:: Do not use aerosol cleaners. Aerosol cleaners can be explosive or
flammable when used on electromechanical equipment.
Use supplies and cleaning materials only as directed.
Do not remove the covers or guards that are fastened with screws. Customer service items are not located behind
these covers.
In case of a Dry Ink or Toner Spill, use a broom or a wet cloth to wipe off spilled dry ink or toner. Sweep slowly to
minimize generation of dust during clean up. Avoid using a vacuum. If a vacuum must be used, the unit should be
designed for combustible dusts, having an explosion rated motor and non-conductive hose.
CCAAUUTTIIOONN——HHOOTT SSUURRFFAACCEE:: The metallic surfaces in the fuser area are hot. Use caution when you
remove paper jams from this area and avoid touching any metallic surfaces.
14
Xerox
®
C230 Color Printer User Guide
Safety
To Next Page
Loading...
Need help?
General