Xerox C230 - Out of Service Erase

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
DDeevviiccee OOppeerraattiioonnss
Clear all remotely-installed messages
Erase messages that were remotely installed.
Note: This menu item is available only in some
printer models.
DDeevviiccee OOppeerraattiioonnss
• Automatically Display Error Screens
– On*
– Off
Show existing error messages on the display after the
printer remains inactive on the home screen for a
length of time equal to the Screen Timeout setting.
Note: This menu item is available only in some
printer models.
TToonneerr ppaattcchh sseennssoorr sseettuupp
• Calibration frequency preference
– Disabled
– Fewest color adjustments
– Fewer color adjustments
– Normal*
– Better color accuracy
– Best color accuracy
Set the default calibration frequency.
TToonneerr ppaattcchh sseennssoorr sseettuupp
Full calibration
Run the full color calibration.
TToonneerr ppaattcchh sseennssoorr sseettuupp
Print TPS information page
Print a diagnostic page that contains toner patch
sensor calibration.
Note: An asterisk (*) next to a value indicates the factory default setting.
Out of Service Erase
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
EErraassee PPrriinntteerr MMeemmoorryy
• Printer Memory Last Sanitized
• Sanitize all information on nonvolatile memory
• Erase all printer and network settings
• Erase all shortcuts and shortcut settings
Clear all settings and applications that are stored in the
printer.
Note: *Available only in some printer models.
Xerox
®
C230 Color Printer User Guide 73
Use printer menus