EasyManuals Logo
Home>Xerox>Printer>C230

Xerox C230 User Manual

Xerox C230
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
Using the Push Button method
1. From the home screen, touch SSeettttiinnggss > NNeettwwoorrkk//PPoorrttss > WWiirreelleessss > WWii--FFii PPrrootteecctteedd SSeettuupp > SSttaarrtt PPuusshh
BBuuttttoonn MMeetthhoodd.
2. Follow the instructions on the display.
Using the personal identification number (PIN) method
1. From the home screen, touch SSeettttiinnggss > NNeettwwoorrkk//PPoorrttss > WWiirreelleessss > WWii--FFii PPrrootteecctteedd SSeettuupp > SSttaarrtt PPIINN
MMeetthhoodd.
2. Copy the eight-digit WPS PIN.
3. Open a web browser, and then type the IP address of your access point in the address field.
To know the IP address, see the documentation that came with your access point.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
4. Access the WPS settings. For more information, see the documentation that came with your access point.
5. Enter the eight-digit PIN, and then save the changes.
CONFIGURING WI-FI DIRECT
Wi-Fi Direct is a Wi-Fi-based peer-to-peer technology that allows wireless devices to connect directly to a Wi-Fi
Direct-enabled printer without using an access point (wireless router).
1. From the control panel, navigate to SSeettttiinnggss >> NNeettwwoorrkk//PPoorrttss >> WWii--FFii DDiirreecctt.
For non-touch-screen printer models, to navigate through the settings, press OOKK.
2. Configure the settings.
Enable Wi-Fi Direct: Enables the printer to broadcast its own Wi-Fi Direct network.
Wi-Fi Direct Name: Assigns a name for the Wi-Fi Direct network.
Wi-Fi Direct Password: Assigns the password for negotiating the wireless security when using the peer-to-
peer connection.
Show Password on Setup Page: Shows the password on the Network Setup Page.
Auto-Accept Push Button Requests: Lets the printer accept connection requests automatically.
Note: Accepting push-button requests automatically is not secured.
By default, the Wi-Fi Direct network password is not visible on the printer display. To show the password,
enable the password peek icon. From the control panel, navigate to SSeettttiinnggss >> SSeeccuurriittyy >> MMiisscceellllaanneeoouuss >>
EEnnaabbllee PPaasssswwoorrdd//PPIINN RReevveeaall.
To know the password of the Wi-Fi Direct network without showing it on the printer display, from the
control panel navigate to SSeettttiinnggss >> RReeppoorrttss >> NNeettwwoorrkk >> NNeettwwoorrkk SSeettuupp PPaaggee.
CONNECTING A MOBILE DEVICE TO THE PRINTER
Before connecting your mobile device, make sure that Wi-Fi Direct has been configured. For more information, see
Configuring Wi-Fi Direct.
Xerox
®
C230 Color Printer User Guide 47
Set up, install, and configure

Table of Contents

Other manuals for Xerox C230

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox C230 and is the answer not in the manual?

Xerox C230 Specifications

General IconGeneral
BrandXerox
ModelC230
CategoryPrinter
LanguageEnglish

Related product manuals