MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
• On
RReessttrriicctteedd SSeerrvveerr LLiisstt Specify an IP address for the TCP connections.
• This menu item appears only in some printer
models.
• Use a comma to separate each IP address.
• You can add up to 50 IP addresses.
RReessttrriicctteedd SSeerrvveerr LLiisstt OOppttiioonnss
• Block All Ports*
• Block Printing Only
• Block Printing and HTTP Only
Specify how the IP addresses in the list can access the
printer functionality.
Note: This menu item appears only in some
printer models.
MMTTUU Specify a maximum transmission unit (MTU) parameter
for the TCP connections.
RRaaww PPrriinntt PPoorrtt
1–65535 (9100*)
Specify a raw port number for printers connected on a
network.
OOuuttbboouunndd TTrraaffffiicc MMaaxxiimmuumm SSppeeeedd
• Disabled*
• Enabled
Enable the printer maximum transfer rate.
TTLLSS SSuuppppoorrtt From the Embedded Web Server, go to SSeettttiinnggss >>
NNeettwwoorrkk//PPoorrttss >> TTCCPP//IIPP.
Enhance printer privacy and data integrity.
Note: The TLS settings pertain to the Embedded
Web Server only. They do not pertain to clients
using TLS. For more information, refer to the
Embedded Web Server Administrator Guide.
Note: TLSv1.3 is supported by default, and
cannot be disabled. Deselecting the other TLS
settings will force the EWS to use TLSv1.3 only.
EEnnaabbllee TTLLSSvv11..00
• Off*
• On
Enable the TLSv1.0 protocol settings.
EEnnaabbllee TTLLSSvv11..11
• Off*
• On
Enable the TLSv1.1 protocol settings.
EEnnaabbllee TTLLSSvv11..22
• On*
• Off
Enable the TLSv1.2 protocol settings.
SSSSLL CCiipphheerr LLiisstt Specify the cipher algorithms to use for the SSL or the
Xerox
®
C230 Color Printer User Guide 93
Use printer menus
To Next Page
Loading...
Need help?
General