Network Configuration
28 ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click IP (Internet Protocol) > DNS.
3. Under Host Name, type a unique name for your printer. If the host name successfully registers to the
DNS server, the host name appears under Verified Host Name. The default host name is XRX_xxx,
where xxx is the MAC address of the printer.
Note: If no host name, or a different host name appears under Verified Host Name, the host name
did not successfully register to the DNS server. Ensure that your network supports direct client DNS
name registration, or configure your DHCP server to perform updates on behalf of the DHCP clients.
Configure your DNS server to allow dynamic updates.
4. Under Domain Name, type the name of the domain to which the printer is connected.
If the domain name successfully registers to the DNS server, the domain name appears under
Verified Domain Name.
To Next Page
Loading...
Need help?
General
