Managing Copy Functions
116 ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Accessing Copy Presets
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings.
3. Touch Copy Service Settings.
Edge Erase Presets
To create an Edge Erase Preset:
1. Touch Edge Erase Presets.
2. Touch Presets, then touch Available in the list of presets.
3. Touch Name at the bottom of the window, then, using the touch screen keyboard, touch Clear Text.
4. Enter the name of the new preset, then touch Save.
To edit an existing preset:
1. Touch Edge Erase Presets.
2. Touch Presets, then touch the desired preset.
3. Touch Side 1, then touch the arrows to change the amount to erase from each edge.
4. Touch Side 2, then touch the arrows to change the amount to erase from each edge, or touch Mirror
Side 1.
5. Touch Save.
Changing Image Shift Presets
1. Touch Image Shift Presets.
2. Touch Presets, then touch the desired preset.
3. Touch the arrows to change the amount of Up/Down and Left/Right shift for Side 1 and Side 2.
4. Touch Save.
Changing Reduce/Enlarge Presets
1. Touch Reduce/Enlarge Presets.
2. To change a proportional preset, touch Proportional %, touch the desired preset between 1–10, then
type the percentage using the touch-screen keypad.
3. To change a preset that uses an independent percentage for the width and length of the image,
touch Independent X-Y%.
4. Touch the X and Y for the preset you want to change, then type the scale percentage using the
touch-screen keypad.
5. Touch Save.
To Next Page
Loading...
Need help?
General
