Network Configuration
ColorQube 9301/9302/9303 Multifunction Printer 47
System Administrator Guide
1. Click Authorization Access at the top of the LDAP Server page.
2. On the Authorization Access page, click the User Roles tab.
3. In the System Administrator Access field, type the name of an LDAP server group to use to grant
system administrator access to the printer.
4. In the Accounting Administrator Access field, type the name of the LDAP server group to use to grant
accounting administrator access to the printer.
5. Click Apply.
6. To verify if a user has access to either role, type the user name in the Enter User Name field, then
click Test.
If the pathway is locked and if the user is a member of the LDAP group, the group appears next to
the user name. If the user is not a member of the group, No Access appears.
7. When completed, click Close.
Configuring Device Access
1. Click Authorization Access at the top of the LDAP Server page.
2. On the Authorization Access page, click the Device Access tab.
3. In the Services Pathway field, type the name of an LDAP server group to use to allow access to
printer services and features.
4. Repeat the process for Job Status Pathway and Machine Status Pathway.
5. Click Apply.
6. To verify if a user has access to either role, type the user name in the Enter User Name field, then
click Test.
If the pathway is locked and if the user is a member of the LDAP group, the group appears next to
the user name. If the user is not a member of the group, No Access appears.
7. Click Close.
Note: Device or Service Access setup requires that Authentication is configured and Tools and
Feature Access are configured to require users to log in before accessing services.
Configuring Services Access
You can specify access to the services of the printer under Service Access. Type the names of the LDAP
groups for any of the services listed.
To Next Page
Loading...
Need help?
General
