Xerox ColorQube 9303 Series System Administrator Guide

Security
66 ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Configuring Authentication Server Settings for Kerberos (Solaris)
1. On the Xerox
®
Access Setup page, click Edit next to Authentication Servers.
2. Under Authentication Type, select Kerberos (Solaris).
3. Click Add New.
4. Under Server Information, in the Realm field, type the realm for your authentication server.
5. Select the desired address type. Options are IPv4 Address, IPv6 Address, or Host Name.
6. Type the appropriately formatted address and port numbers for both the primary and backup
addresses. The default port number is 88.
Note: A backup address is optional.
7. If you want to use an LDAP server for Network Authorization or Personalization:
a. Click Add LDAP Mapping.
b. Select the LDAP server from the list and click Add Mapping, or click Add New to add a new
LDAP server.
8. Click Save Server.
9. To specify server settings for an alternate authentication server, click Add New.
10. To copy the settings from another server, select a server from the list and click Copy From.
11. Click Edit to update the settings.
Configuring Authentication Server Settings for Kerberos (Windows 2000/2003)
1. On the Xerox
®
Access Setup page, click Edit next to Authentication Servers.
2. Under Authentication Type, select Kerberos (Windows 2000/2003).
3. Click Add New.
4. Under Server Information, in the Realm field, type the realm for your authentication server.
5. Select the desired address type. Options are IPv4 Address, IPv6 Address, or Host Name.
6. Type the appropriately formatted address and port numbers for both the primary and backup
addresses. The default port number is 88.
Note: A backup address is optional.
7. If you want to use an LDAP server for Network Authorization or Personalization:
a. Click Add LDAP Mapping.
b. Select the LDAP server from the list and click Add Mapping, or click Add New to add a new
LDAP server.I
8. Click Save Server.
9. To specify server settings for an alternate authentication server, click Add New.
10. To copy the settings from another server, select a server from the list and click Copy From.
11. Click Edit to update the settings.
Configuring Authentication Server Settings for NDS (Novell)
Before you begin:

Xerox ColorQube 9303 Series Specifications

General

Brand	Xerox
Model	ColorQube 9303 Series
Category	All in One Printer
Language	English