Security
92 ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
a. To save the certificate file to your computer, at the bottom of the page, click Save Base-64
encoded (PEM).
b. Click Cancel to return to the previous page.
10. Under User Name (Device Name), type the user name required by your authentication switch and
server.
11. Type the Password, then retype it to confirm.
12. To save the new password, select the check box next to Select to save new password. A password is
not required for EAP-TLS authentication.
13. Click Apply to save the new settings or Undo to retain the previous settings.
To Next Page
Loading...
Need help?
General
