Installing the Duplex Tray 1. Setting up the DocuColor 2006
Xerox DocuColor 2006 1-33
b. Connect the tiny connector on the rear of the Upper Inverter to the
small jack in the access hole, as shown below.
301132A-WO
0
301062b
g. Install the new Connector Cover with the cutout into the access
hole, guiding the wires through the cutout in the cover.
301133A-WO
0
301063b
CAUTION
Use caution if you must rearrange the tiny wires on the connector in order to
close the Connector Cover.
To Next Page
Loading...
