1. Setting up the DocuColor 2006 Installing the Sorter/Stacker
1-62 Xerox DocuColor 2006
Connecting the Sorter/Stacker
Read all the steps before performing this procedure.
CAUTION
Ensure that the power is off on the copier/printer before you begin to install
the Sorter/Stacker.
1. Switch off the copier/printer.
2. Remove the output tray from the copier/printer.
3. At the Sorter/Stacker, extend the attachment plate.
CAUTION
Do not press down on the attachment plate as this may cause the unit to tip.
To Next Page
Loading...
