Xerox DocuMate 3920 - Scanning to a Printer

Xerox DocuMate 3920
User’s Guide
36
Scanning to a Printer
1. Place your document face up in the ADF or face down on the flatbed glass.
2. Press the Copy button on the scanner.
3. The LCD touch screen displays the copying options.
4. Select the options you want to use for the documents you are scanning on the Basic, Image Edit,
and Advanced Copy tabs.
Note that any settings you change here are not permanently saved. The next time the copy
function is used, the default copy options will be displayed in the LCD screen.
The next section describes each feature in detail.
5. Use the numeric keypad on the scanner to set the number of copies you want printed.
6. Press the B&W or Color button on the scanner to start scanning.
The scanner starts scanning and sends the image to the attached printer.