Xerox DocuMate 3920 User Manual

Xerox DocuMate 3920
User’s Guide
29
Setting the Default Scan Function
The initial default scanning function is e-mail. This means that each time the scanner is power cycled,
when the scanner comes out of power saving mode, or when the scanner has been sitting idle without
scanning, the LCD screen will switch back to the e-mail scanning function automatically. You might
want to change the default scan mode if you are not using the email function, or if you use a different
scanning function more often than email.
1. Press the Menu button on the scanner.
The LCD touch screen displays the following menu.
2. Press the Management button on the LCD touch screen.
3. Press Login on the password prompt screen. There is no default username and password set for
the scanner management options.

Xerox DocuMate 3920 Specifications

General

Brand	Xerox
Model	DocuMate 3920
Category	Scanner
Language	English