Xerox DocuMate 4790
User’s Guide
171
Installing an Imprinter
An imprinter unit will print text, such as a date and time stamp, on the pages as they are scanned. If
you have a pre-imprinter unit installed, the text is printed on the face-up side of the page before the
image is captured, and the printed text is then reflected in the scanned image.
The imprinter unit is an optional accessory that you can purchase at www.xeroxscanners.com in the
Parts and Accessories page for your scanner.
1. Turn off the scanner.
2. Open the pre-imprinter door.
3. Insert the pins on the right side of the imprinter unit into the holes on the scanner. Angle the
imprinter down into the scanner until the pins on the left side line up with the slots in the scanner.
Gently press down on the imprinter unit until it clicks in place.
4. Connect the cable to the connection port in the scanner.
5. Close the pre-imprinter door when you are finished.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
