Xerox DocuMate 4790 User Manual

Xerox DocuMate 4790
User’s Guide
182
Cleaning the Outside of the Scanner
Excessive dust accumulation around and on the scanner will pull into the scanner during the scanning
process and clog the ventilation openings. You should clean the outside of the scanner at least once a
month to help limit the amount of dust build up in the scanner.
Note: You will need the blower brush provided with your scanner and a soft dusting cloth to clean the
scanner.
1. Turn off the scanner power.
2. Using the blower brush, brush away any dust build up around the ventilation openings.
3. Using a soft dusting cloth, wipe down the body of the scanner, input tray and exit area. Make sure
that the input and exit slots in the scanner are also clean.
4. If there is any accumulation of dust in the indentations around the buttons, use the blower brush
to gently brush away the dust.
5. When you’re finished, press the power button to turn the scanner back on.

Xerox DocuMate 4790 Specifications

General

Film scanning	No
Color scanning	Yes
Duplex scanning	-
Input color depth	24 bit
Maximum scan size	297 x 432 mm
Enhanced scan resolution	300 x 300 DPI
Optical scanning resolution	600 x 600 DPI
Display	LCD
Scanner type	Flatbed & ADF scanner
Product color	Blue, White
Sensor type	CCD
Daily duty cycle (max)	10000 pages
Auto document feeder (ADF) input capacity	200 sheets
Minimum scan area (ADF)	48 x 70 mm
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	2048 MB
Minimum processor	Intel® Pentium® 4
Minimum storage drive space	350 MB
Compatible operating systems	Windows 7 Windows Vista Windows XP
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	444 mm
Width	468 mm
Height	339 mm
Weight	18000 g