Xerox DocuMate 4790
User’s Guide
57
6. Select a scanning configuration in the Select configuration list.
The configuration’s basic settings include: scanning mode, resolution (dpi), page size, brightness
(Br), and contrast (Cr). To see a selected scan configuration’s settings, click its icon. Click the icon
again to close the detailed information. Refer to Scan Configurations on page 61 and Configure
Before Scan on page 74 for instructions on creating and modifying scan configurations.
7. Click on OK to save the changes.
8. Place an item in the scanner and click the One Touch button to start scanning.
The scanner scans and sends the image to the selected destination, with the file format and scan
configuration you specified.
Properties button—Displays a window for selecting properties for a destination. This button is
disabled if the selected destination application does not have global configuration properties.
Refresh button—Updates the links between all your computer’s Destination Applications and
One Touch. If you install new software that can be used as a Destination Application, click the Refresh
button to link the new software to One Touch.
New/Copy/Edit/Delete buttons—Click New or Copy to add new scan configurations to the list. Click
Edit or Delete to change or remove them.
OK/Cancel/Apply buttons—OK accepts any changes and closes the window. Apply accepts any
changes but leaves the window open so you can continue making additional changes. Cancel closes
the window without accepting any changes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
