DocuMate 765 Scanner User’s Guide 23
Scanning from One Touch
Scanning from One Touch
One Touch is your main set of controls for the scanner. When the
One Touch software is installed you can scan by pressing either the
Simplex or Duplex button on the scanner. The pages are scanned and
sent to the location, with the scan settings, displayed on the LCD screen.
Scanning with the One Touch Buttons
1. Load the documents face up in the ADF.
2. On the scanner, tap the up or down arrow until you see a profile
appropriate for your scanning job.
As you press the arrow button, the LCD screen will show the name of
each profile, and basic setting information such as resolution (dpi),
color mode, and page size.
3. Press the Simplex button to scan a one-sided document. Press the
Duplex button to scan a two-sided document.
4. The pages are scanned and the final image sent to the destination
specified in the One Touch Properties.
To Next Page
Loading...
Need help?
General