Scanning from One Touch
32 DocuMate 765 Scanner User’s Guide
• Duplex—Scan both sides of the page. If this option is not selected,
the scanner will scan the front side of the page only.
• Skip Blank Originals—Skips pages that are completely blank.
Typically you use this option when you will scan a stack of two-sided
pages which have a number of blank sides. This option is only
available for Duplex scanning in Black&White Mode.
• Color Filter—Color filter is the ability of your scanner to automatically
remove a color from a scanned item. Color filter applies to
Black&White or Grayscale Mode.
NOTE: The Simplex and Duplex buttons on the scanner take
precedence over the One Touch settings. In other words, if the LED
number on the scanner is configured to scan as Duplex, but you press
the Simplex button, the scanner scans in Simplex, and vice versa.
The original with a red
watermark over black text.
The scanned item with the
red filtered out.
To Next Page
Loading...
Need help?
General