Xerox I Class - Page 78

68 I-Class
Standard Calibration (continued)
Step Operator Action Displayed Message Comment
3 Press the Key
to enter the Media
Settings menu.
See Section 4.1.2
for menu layout.
4 Press the Key
and scroll to ‘Sensor
Calibration’.
Press the
Key to abort this
procedure.
5 Press the Key. You are beginning
the standard
calibration
procedure.
6 Press the Key.
Remove the media from
the Media Sensor then
press any key.
This sets the
parameter for the
‘empty’ value.
Where ‘yyy’ is a
numerical value
representing the
current sensor
reading.