Xerox Phaser 3260 User Manual

June 2014
6-10
Xerox® Phaser® 3052/3260 Service Manual
GP 2, GP 3
General Procedures and Information
– Demo Page
• Section 6 Maintenance: Checking the Status of Consumables.
• Section 7 Troubleshooting, Machine Status Indicators, for:
– LED color and status descriptions
– Detailed information on printing machine reports.
GP 3 Machine Firmware Version
Purpose
Use this procedure to check the firmware version of the machine.
Procedure
From the Control Panel:
1. Press the <Cancel> button for more than 4 seconds. The machine will print a Configura-
tion Report listing the firmware version.
From CWIS:
1. Open the Xerox Easy Printer Manager to launch the CentreWare Internet Services
(CWIS) application.
2. Log into CWIS: enter User name: admin and Password: 1111.
NOTE: It may be necessary to obtain the user name and password from the customer if
they have been changed.
3. Select the [Support] Tab. The Firmware version is listed next to the Main Controller
Board.

Xerox Phaser 3260 Specifications

General

Print Technology	Laser
Print Speed	Up to 29 ppm
First Page Out	As fast as 8.5 seconds
Duplex Printing	Automatic
Monthly Duty Cycle	Up to 30, 000 pages
Output Capacity	150 sheets
Processor Speed	600 MHz
Memory	128 MB
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0
Input Capacity	250 sheets
Media Sizes Supported	A4, A5, A6, B5, Executive, Folio, Legal, Letter, Oficio
PDL	PCL 6, PCL 5e, PostScript 3