Xerox Phaser 4510 - Page 28

Installing the Printer Drivers
Phaser® 4510 Laser Printer
2-11
USB Connection
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the CD-ROM drive. Open the Printer Setup Utility for
Mac OS X, version 10.3.x.
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
2. Click the Add button.
3. Select USB from the drop-down menu.
4. Select the printer in the window.
5. Select Xerox from the manufacturers in the drop-down menu.
6. Select the appropriate printer configuration from the list of available printers.
7. Click the Add button.
LPD/LPR Connection
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the
printer software.
2. Once installation is complete, open the Printer Setup Utility for Mac OS X,
version 10.3.x.
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
3. Click the Add button.
4. Select IP Printing from the first pull-down menu.
5. Select LPD/LPR from the second pull-down menu.
6. Enter the printer’s IP address in the Printer Address field.
7. Verify that the Queue Name field is blank.
8. Select Xerox from the Printer Model pull-down menu, and then select the corresponding
PPD file.
9. Click the Add button. The printer is added to the list.