Printing on Specialty Media
Phaser® 4510 Laser Printer
3-43
5. On the control panel, press the OK button if
Index Card is displayed as the current setup,
or select the paper type:
a. Select
Change setup, and then press the OK button.
b. Select
Index Card, and then press the OK button.
6. In the printer driver, select the appropriate tray or paper type.
Printing Custom Size Paper
In addition to the wide variety of standard paper sizes that you can use for printing, you can
also print on custom size paper from any tray. The custom size paper must be within the
following dimensions.
Input Output
Tray 1 Trays 2-4 Standard Tray
500-Sheet
Stacker
1-Sided Printing
Short
Edge
76 – 216 mm
3.0 – 8.5 in.
98 – 216 mm
3.9 – 8.5 in.
76 – 216 mm
3.0 – 8.5 in.
89 – 216 mm
3.5 – 8.5 in.
Long
Edge
127 – 356 mm
5.0 – 14.0 in.
148 – 356 mm
5.8 – 14.0 in.
127 – 356 mm
5.0 – 14.0 in.
140 – 356 mm
5.5 – 14.0 in.
2-Sided Printing
Short
Edge
89 – 216 mm
3.5 – 8.5 in.
98 – 216 mm
3.9 – 8.5 in.
Same as Input Same as Input
Long
Edge
140 – 356 mm
5.5 – 14.0 in.
148 – 356 mm
5.8 – 14.0 in.
Same as Input Same as Input