Xerox Phaser 4510 - Blurred Prints; Random or Spot Deletions

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-14
Blurred Prints
The image is blurred at the edges.
Random or Spot Deletions
Areas of the print are extremely light or missing.
Possible Causes Solutions
The paper may be in poor condition. Replace the paper.
The paper may be damp. Replace the paper.
The print cartridge may be defective. Replace the print cartridge.
Possible Causes Solutions
The paper may be in poor condition. Replace the paper.
The paper may be damp. Replace the paper.
The print cartridge may be defective or at the end
of its life.
Replace the print cartridge.