Printing on Specialty Media
Phaser® 4510 Laser Printer
3-27
5. Insert the transparencies into the tray.
Caution: Do not load transparencies above the fill line indicated on the paper tray.
Overloading the tray may cause jams. In the following illustration, the lower fill line
indicates the maximum fill line for transparencies.
6. Adjust the paper guides to fit the transparencies.
7. Replace the lid on the tray.
Caution: The lid of the tray must be firmly closed. If not, the transparencies may become
misaligned and cause a jam.
4510-080
4510-081
4510-082
4510-099
To Next Page
Loading...
