Loading Paper
Phaser® 7400 Color Printer
3-9
Long-Edge Feed
Use long-edge feed for all supported paper types and sizes, except labels and paper that is
longer than 305 mm (12.0 in.) or narrower than 142 mm (5.6 in.).
To load paper or other media in Tray 1 (MPT):
1. Open Tray 1 (MPT) by pulling out on the handle, and then unfold the tray extensions.
2. Load the paper or other media with the long edge against the roller, as shown in the
following illustrations:
■ For single-sided printing, place the side to be printed faceup, with the top of the page
towards the back of the printer. Prepunched holes should enter the printer first.
7400-094
1
2
3
7400-246
To Next Page
Loading...
