Xerox Phaser 7400

Controlling the Quality of Your Prints
Phaser® 7400 Color Printer
4-2
Controlling the Quality of Your Prints
This section includes:
■ Selecting a Print-Quality Mode on page 4-2
■ Adjusting Color on page 4-3
Selecting a Print-Quality Mode
The print-quality mode and TekColor correction directly control the quality of your prints. The
print-quality mode and paper type directly control the print speed. You can change these
settings in the printer driver or on the control panel.
The following table describes the print-quality modes:
Print-Quality Mode Type of Print Job
Standard General-purpose mode for crisp, bright color prints at high speed.
Recommended for most office use and quick prints.
Enhanced High-quality mode for fine lines and sharp text. Recommended for
detailed prints.
Photo Highest-quality mode for very smooth color shades. Recommended for
printing photographs or when using graphic arts applications and press
matches.
Automatic Automatically selects the most optimal print-quality mode for the paper
type selected. For example, Photo print-quality mode is used when
printing on glossy paper, but Standard print-quality mode is used when
printing on plain paper. (This setting is only available in the printer
driver.)