Xerox Phaser 7400

Printing on Specialty Media
Phaser® 7400 Color Printer
3-36
4. Push the tray completely into the printer.
5. At the control panel, select Paper Tray Setup, and then press the OK button.
a. Select Tray 2 Paper, and then press the OK button.
b. Select Change setup, and then press the OK button.
c. Select Phaser 35-Series Transparency as the paper type, and then press the
OK button.
d. Select the appropriate transparency size, and then press the OK button.
6. In the printer driver, select Transparency as the paper type and/or select Tray 2 as the
paper source.
7400-023