Xerox Phaser 7400

Choosing Output Options
Phaser® 7400 Color Printer
3-50
Choosing Output Options
This section includes:
■ Output Tray Guidelines on page 3-50
■ Offsetting Output on page 3-52
■ Stapling Output on page 3-53
■ Using the Hole Puncher on page 3-54
Output Tray Guidelines
The printer has an output tray on top of the printer and an output tray on the left side of the
printer. If your printer has a finisher installed, you can send output to the finisher to be
punched and/or stapled. Use the following guidelines to choose which output tray to use for
your print jobs:
Top Output Tray (Factory default)
■ Use for all paper and media types.
■ Use for paper and media sizes with heights
111 mm (4.4 in.) or more.
■ Delivers output facedown.
Left-Side Output Tray
■ Use for paper and media sizes with heights less
than 111 mm (4.4 in.).
■ Delivers output faceup.
■ Use to reduce curling of heavy paper or specialty
media.
■ Open the left-side output tray before selecting it
from the printer driver.
7400-028
XEROX
7400-029