Xerox Phaser 7400

Choosing Output Options
Phaser® 7400 Color Printer
3-51
Selecting an Output Tray from the Printer Driver
To select an output tray for a specific print job:
See also:
Stapling Output on page 3-53
Using the Hole Puncher on page 3-54
Finisher Output Tray (Optional)
■ Use for paper and other media within the following dimensions:
Width: 305 mm (12 in.) or less
Height: 125 mm (4.9 in.) or more
■ Delivers paper less than 457 mm (18 in). long facedown; delivers longer paper,
card stock, and specialty media faceup.
Operating System Steps
Windows98SE,
Windows Me,
Windows 2000,
Windows XP,
Windows Server
2003, or
Windows NT 4.x
1. Select the Output Options tab.
2. Select the ouput tray from the Paper Destination drop-down list.
Mac OS 9 or
Mac OS X, version
10.2 and higher
1. In the Print dialog box, select Finishing Options from the drop-down
list.
2. Select the output tray from the Paper Destination drop-down list.
7400-030
XEROX