Xerox Phaser 7400

Printing on Specialty Media
Phaser® 7400 Color Printer
3-39
3. If you loaded envelopes with a height less than 111 mm (4.4 in.), open the left-side output
tray.
4. When the control panel prompts you to confirm the type and size of paper in the tray,
select Change setup, and then press the OK button.
a. Select Envelope as the paper type, and then press the OK button.
Note: If you are printing on unusually light or heavy envelopes, select Light Envelopes
or Heavy Envelopes. For more information, see Supported Paper and Media on
page 3-3.
b. Select the appropriate envelope size, and then press the OK button.
5. In the printer driver, select Tray 1 as the paper source and/or select Envelope as the paper
type.
1
2
3
7400-012
1
2
3
7400-012