Need help?Do you have a question about the Xerox Phaser6700 and is the answer not in the manual?
Guide for configuring the printer via its web interface (CentreWare Internet Services).
Detailed steps for configuring TCP/IP settings, both IPv4 and IPv6, manually and via DHCP.
Steps to enable and configure SNMP versions v1/v2c and v3 for network monitoring.
Enabling and configuring HTTP and HTTPS (SSL) for CentreWare Internet Services.
How to configure access restrictions for CentreWare Internet Services pages.
Enabling and configuring SSL encryption for secure HTTP connections.
Enabling FIPS 140 Mode for data encryption and compliance checks.
Steps to encrypt user data on the printer's hard drive.
Creating and managing IP filter rules to block or allow network access.
Configuration of IPsec for securing IP communications with encryption and authentication.
Managing digital certificates for secure printer communication.
Enabling and configuring 802.1X for port-based network access control.
Procedures for deleting and overwriting image data for security.
Viewing printer status, alerts, and configuring notification settings.
To Next Page
General