Administrator Tools
86 Phaser 6700 Color Printer
System Administrator Guide
Calibration
Color Calibration and Color Registration
If colors are incorrect, prints are blurred, or if you see color halos in prints, calibrate the printer by
adjusting Color Calibration or Color Registration.
1. At the control panel, touch Printer.
2. Touch the Tools tab, then touch Adjust Color.
3. Touch an option:
Color Calibration adjusts the printer to make corrections to color density and gray balance.
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with
color halos.
4. Follow the onscreen instructions.
To Next Page
Loading...
Need help?
General