Xerox Phaser6700 - Appletalk

Network Configuration
18 Phaser 6700 Color Printer
System Administrator Guide
AppleTalk
AppleTalk is a proprietary suite of protocols developed for networking computers by Apple, Inc. An
AppleTalk zone is a group of nodes or networks organized by departments or physical locations.
Before you begin:
 Verify that there is an existing operational AppleTalk network.
 Determine the AppleTalk Name you wish to assign to your printer.
 Determine the AppleTalk Zone, if used, to assign to your printer.
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click AppleTalk.
3. Under Protocol, select Enabled to enable the protocol.
4. Under Printer Name, type the printer name or use the default name. The default printer name is
based on the printer MAC address.
5. Under Zone Name, type a new zone name or use the default AppleTalk local zone. The default
AppleTalk local zone is *.
6. Click Apply to save the new settings or Undo to retain the previous settings.
7. Click Default All to reset settings to default values.