Network Configuration
Phaser 6700 Color Printer 25
System Administrator Guide
Note: If no domain name, or a different domain name appears, the domain name did not
successfully register to the DNS server. Ensure that your network supports direct client DNS name
registration, or configure your DHCP server to perform updates on behalf of the DHCP clients.
Configure your DNS server to allow dynamic updates.
5. Select Enabled under Dynamic DNS Registration of IPv4 Address, or Dynamic DNS Registration of
IPv6 Address, if desired. This option allows your DDNS server to register the host name of the printer
automatically. If you change the host name in CentreWare Internet Services, the registered host
name is updated on your DDNS server. Clear the Enabled check box if your network does not support
dynamic name addressing. Manage host names in the DNS server manually.
6. Under Remove this Device's IPv4 DNS Registration, select Enabled if necessary. This option allows
the printer to send a release request to the DHCP and DNS servers. If the servers grant the request,
the current IP address and any dynamic DNS name are released when the printer is turned off.
7. Under Remove this Device's IPv6 DNS Registration at power down, select Enabled if necessary. This
option allows the printer to release the current DCHP-assigned address and any DNS name when the
printer is turned off.
8. To allow users to see and connect to the printer using Bonjour, under Multicast DNS Registration,
select Enabled.
9. If you have a DHCP server, and the printer recognizes your DNS server, the address appears under
DNS Server Addresses. If you want to use other DNS servers, type the IPv4 or IPv6 server address
under Additional DNS Server Addresses.
10. Under DNS Connection Timeout, type the time in seconds that the printer waits if it fails to connect
to a DNS server. After the timeout period, the printer attempts to connect to any additional DNS
servers.
11. If you have a DHCP server, recognized search domain names appear in a list under Domain Name
Search List.The list of domain names allows the DNS server to recognize unqualified host names. If
you want the printer to search for other domain names, type the domain names under Additional
Search Domains.
12. Under Append Device Domain, select Enabled to add the domain of the printer to the Domain
Name Search List.
13. Under Append Parent Domains, select Enabled to add the parent domains of the printer to the
Domain Name Search List.
14. Click Apply.
To Next Page
Loading...
Need help?
General