Xerox PrimeLink B9110

1. Open the finisher front cover.
2. Pull out the Saddle Stitch Unit 3 toward you until it stops.
3. To remove the staple cartridge, hold the tabs on the cartridge, then pull the cartridge out of the printer.
Note: There are two booklet staple cartridges provided. The message on the printer control panel touch
screen indicates which cartridge needs replacement.
426 Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Production Ready Finishers