Xerox VersaLink B605 User Manual

Probable Causes Solutions
The printer cable is disconnected. If the Status LED does not flash once after you send
a print job, check the connection between the printer
and the computer.
There is a network-connectivity issue. If the printer is connected to a network:
1 Verify that the Ethernet cable is connected to the
printer.
2 On the printer Ethernet connector, verify that the
green LED is On. If the green LED is not lighted,
reseat both ends of the Ethernet cable.
3 Examine the TCP/IP address in the
Communication section of the Configuration
Report. For more information, refer to Printing the
Configuration Report.
4 If the TCP/IP address is 0.0.0.0, the printer needs
more time to acquire an IP address from the
DHCP server. Wait 2 minutes, then print the
Configuration Report again.
5 If the TCP/IP address is unchanged, or begins
with 169, contact your network administrator.
There is a wireless network setup or connectivity
issue.
Verify that the Wireless Network Adapter is installed
and properly configured. For more information, refer
to Connecting to a Wireless Network.
PPrriinnttiinngg TTaakkeess TToooo LLoonngg
Probable Causes Solutions
The printer is set to a slower printing mode. For
example, the printer could be set to print on
heavyweight paper.
It takes more time to print on certain types of special
paper. Ensure that the paper type is set properly in
the print driver and at the printer control panel. For
more information, refer to Print Speed.
The printer is in Power Saver mode. It takes time for printing to start when the printer is
exiting Power Saver mode.
The printer may be improperly installed on the
network.
• Determine if a print spooler or a computer sharing
the printer is buffering all print jobs and then
spooling them to the printer. Spooling can slow
print speeds.
• To test the speed of the printer, print some
Information Pages such as the Demonstration
Print. If the page prints at the rated speed of the
printer, there could be a network or printer
installation issue. For additional help, contact the
system administrator.
200
Xerox
®
VersaLink
®
B605/B615 Multifunction Printer
User Guide
Troubleshooting

Xerox VersaLink B605 Specifications

General

Copier resize	25 - 400 %
Package depth	660 mm
Package width	600 mm
Package height	1000 mm
Package weight	41000 g
Country of origin	Vietnam
Maximum resolution	1200 x 1200 DPI
Optional connectivity	Wireless LAN
Maximum number of copies	999 copies
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Sustainability certificates	ENERGY STAR
Operating relative humidity (H-H)	10 - 85 %
Copy speed (black, normal quality, A4)	55 cpm
Book copy function	Yes
Maximum copy resolution	600 x 600 DPI
Time to first copy (black, normal)	5.2 s
N-up printing	16
Print technology	Laser
Warm-up time (from sleep mode)	11 s
Time to first page (black, normal)	4 s
Print speed (black, normal quality, A4/US Letter)	55.5 ppm
Duplex print speed (black, normal quality, A4/US Letter)	49.3 ppm
PCL fonts	83
Digital sender	-
Printing colors	Black
Maximum duty cycle	300000 pages per month
Recommended duty cycle	0 - 25000 pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Page description languages	HP-GL, PCL 5e, PCL 6, PostScript 3
Storage relative humidity (H-H)	10 - 95 %
Scan to	E-mail, FTP, SMB, USB
Scan drivers	TWAIN, WIA
Scanner type	Flatbed & ADF scanner
Maximum scan area	216 x 356 mm
Output color depth	24 bit
Scan speed (black)	58 ppm
Scan speed (color)	55 ppm
Output grayscale depth	8 bit
Image formats supported	JPG, TIF, TIFF
Document formats supported	PDF, XPS
Faxing	Mono faxing
Fax memory	4 MB
Modem speed	33.6 Kbit/s
Fax forwarding to	E-mail, Fax
Control type	Touch
Product color	Blue, White
Market positioning	Business
Browser supported	Microsoft Internet Explorer, Microsoft Edge, Mozilla, Firefox, Apple Safari, Google Chrome
Printer management	DHCP, SNMP, WINS, HTTP, HTTPS, TLS, SNTP, MDNS
Cabling technology	10/100/1000Base-T(X)
Security algorithms	256-bit AES, FIPS 140-2, HTTPS, IPPS, IPSec, SNMPv3, SSL/TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Online services supported	Dropbox, Google Drive, OneDrive
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service, Xerox PrintBack
Supported network protocols (IPv4)	TCP/IP:HTTP/HTTPS, InternetPrintingProtocol, LPR/LPD, RawSocketPrinting/Port9100, IPv4/IPv6, WSD, LDAP, Bonjour/AirPrint, FTP
Supported network protocols (IPv6)	IPv6
Paper input type	Paper tray
Total input capacity	700 sheets
Total output capacity	400 sheets
Total number of input trays	2
Custom media width	76 - 216 mm
Custom media length	127 - 356 mm
Duplex media weight	60 - 176 g/m²
Paper tray media types	Bond paper, Card stock, Envelopes, Labels, Letterhead, Lightweight paper, Plain paper, Pre-Printed, Recycled paper
Paper tray media weight	60 - 128 g/m²
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Compatibility	VersaLink B605/B615
Internal memory	4096 MB
Processor family	ARM
Processor frequency	1050 MHz
Card reader integrated	No
Internal storage capacity	250 GB
Sound power level (standby)	22.9 dB
Sound pressure level (printing)	58.3 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.3 W
Power consumption (sleep)	1.1 W
Power consumption (standby)	90 W
Power consumption (average operating)	820 W
Mac operating systems supported	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Other operating systems supported	HP-UX 11.31, IBM AIX 7.2, Solaris 11
Server operating systems supported	Windows 2000 Server, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Cables included	Phone
Harmonized System (HS) code	84433100

Weight and Dimensions

Depth	502.8 mm
Width	470 mm
Height	843.7 mm
Weight	39300 g