Xerox
®
Apps
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 87
User Guide
Creating a Booklet
The booklet feature reduces the original page images to fit two images on each side of the printed page.
You can print copies in booklet format.
Note: In Booklet mode, the printer scans all the original documents before it prints the copies.
To create a booklet:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Booklet Creation.
Notes:
• If you adjusted the Reduce/Enlarge setting, a message appears, confirming tha
t
R
educe/Enlarge changed to Auto%.
• If you set Paper Supply to Auto Select, a message appears, confirming that Paper Supply
changed to Tray 1.
4. Touch the Booklet Creation toggle button.
5. Touch Original Document, then select the option that matches your original documents.
− 1-Sided Original: This option scans only one side of the original image and produces 1-sided
output files.
− 2-Sided Original: This option scans both sides of the original image.
− 2-Sided, Rotate Side 2: This option scans both sides of the original image, rotating the
second side.
6. If a cover sheet is required, touch the Cover toggle button, then adjust Paper Supply and Print On
Cover as needed.
7. To increase or reduce the amount of white space in the margin between the two pages, touch
Gutter Margin, then touch the plus icon (+) or the minus icon (-).
8. To print booklets containing an odd number of pages, touch Odd Page Management. To specif
y
the location of extra blank pages, touch Blank Page Front or Blank Page Back, as needed.
9. To set the number of sheets in the booklet, touch the Sheets per Signature toggle button. To adjus
t
th
e number of sheets, touch Plus (+) or Minus (-), as needed.
10. Touch OK.
To Next Page
Loading...
Need help?
General
