8. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Labels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to Configuring Tray
Settings.
9. To confirm the settings, touch OOKK.
10. To return to the Home screen, press the HHoommee button.
Loading Labels in Trays 3 and 4
1. Pull out Tray 3 or Tray 4 until it stops. Wait for the tray to lower and stop.
Note: Ensure that labels are the correct size for the tray. Do not load custom-size paper into Trays 3 or 4.
2. To load labels in the tray, insert labels face up with the top edge toward the back. Stack the labels against the
left-rear corner of the tray as shown.
3. Slide the tray back into the printer.
4. At the control panel, select the correct paper type and color. Ensure that the paper type is set to Labels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to Configuring Tray
Settings.
5. To confirm the settings, touch OOKK.
6. To return to the Home screen, press the HHoommee button.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 187
Paper and Media
To Next Page
Loading...
