5. Close Door B.
Clearing Jams at Door C
1. Open the Bypass Tray, lift the release lever, then open Door A.
WWaarrnniinngg:: The area around the Fuser can be hot. Use caution to avoid injury.
CCaauuttiioonn:: Do not touch the transfer roller. Touching the roller can reduce image quality.
2. At Door C, lift the release lever, then open Door C.
3. Remove any jammed paper in the paper output area.
Note: If the paper is torn, remove all torn pieces from the printer.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 229
Troubleshooting
To Next Page
Loading...
