Xerox VersaLink C71 Series User Documentation

1. Remove the screw that holds the spacer plate at the back of the tray.
2. To remove the spacer plate, grasp the spacer plate and lift upward.
3. Place the tabs at the bottom of the spacer plate into the slots in the bottom of Tray 6 that
correspond with the paper size.
4. Slide the top of the spacer plate down to engage the peg on the back of the tray into the
matching hole in the plate.
164

Xerox VersaLink C71 Series Specifications

General

Brand	Xerox
Model	VersaLink C71 Series
Category	Printer
Language	English