Xerox WorkCentre 5222 - 092-661 Temperature Sensor RAP; 092-662 Humidity Sensor RAP

February, 2008
2-573
WorkCentre 5225, 5230
092-661, 092-662
Status Indicator Raps
Launch Version
092-661 Temperature Sensor RAP
BSD-ON:9.4
There is a temperature sensor failure.
Procedure
Check the operating voltages between the Temperature/Humidity Sensor and the MCU PWB. The
voltages are correct.
YN
Verify that the circuit is not damaged. If no damage is found, replace the MCU PWB (PL
9.1).
Replace the Temperature/Humidity Sensor (PL 4.2).
092-662 Humidity Sensor RAP
BSD-ON:9.4
There is a humidity sensor failure.
Procedure
Check the operating voltages between the Temperature/Humidity Sensor and the MCU PWB. The
voltages are correct.
YN
Verify that the circuit is not damaged. If no damage is found, replace the MCU PWB (PL
9.1).
Replace the Temperature/Humidity Sensor (PL 4.2).