P
RINTING
5.17
5
4
In the Edit Overlays window, click Create Overlay.
5
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover).
6
Click Save. You can see the name on the Overlay List.
7
Click OK or Yes until you complete creating.
The file is not printed out. Instead it is stored in your
computer HDD disk.
NOTE:
The overlay document size must be the same as
documents you will print with the overlay. Do not create an overlay
with a watermark.
To Next Page
Loading...
Need help?
General
