G
ETTING
S
TARTED
1.10
Setting the Dial Mode
You can select the type of the telephone dial system where your
machine is connected.
NOTE:
The Dial Mode setting may be unavailable depending on
your country.
1
Press Menu until “Machine Setup” appears on the top line
of the display.
2
Press the scroll button (
¦
or
) until you see “Dial Mode”
on the bottom line and press Enter.
3
Press the scroll button (
¦
or
) to select the desired dial
mode.
Select “Tone” if your machine is connected to a tone dial
line.
Select “Pulse” if the machine is connected to a pulse dial
line.
4
Press Enter to save the selection.
To return to Standby Mode, press Stop/Clear.
Using the Toll Save Mode
Using the Toll Save button on the control panel, you can quickly
set your machine to send the document(s) stored in the memory
during the preset time slot, when the call charge is lowered. This
Toll Save mode helps you to take advantage of lower long
distance rates at night, for example.
NOTE
: The toll-saving time slot may vary depending on your
contract with a long distance phone company.
To Next Page
Loading...
Need help?
General
