M
AINTENANCE
7.10
Setting the Notify Toner Option
If you have set the Notify Toner menu option to “On”, your
machine automatically sends a fax to your service company or
the dealer to notify them that your machine requires a new
toner cartridge when the toner cartridge needs to be replaced.
The fax number is preset by your dealer when you bought your
machine.
1
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
2
Press the scroll button (
¦
or
) to display “Notify Toner”
on the bottom line and press Enter.
3
Press
the scroll button (
¦
or
)
to change the setting.
Select “On” to enable this feature. Selecting “Off” disables
this feature.
4
Press Enter to save the selection.
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
cartridge may require cleaning.
1
Before setting the cleaning procedure, make sure that
paper is loaded in the machine.
2
Press Menu on the control panel until “Maintenance”
appears on the top line of the display. The first available
menu item, “Clean Drum,” displays on the bottom line.
3
Press Enter.
The display confirms your selection.
The machine prints out a cleaning page. Toner particles on
the drum surface are affixed to the paper.
4
If the problem remains, repeat steps 1 through 3.
To Next Page
Loading...
Need help?
General
