I
NSTALLING
S
OFTWARE
2.4
Installing Software
Installing the drivers and other software will enable PC printing.
Ensure the WorkCentre PE16 is plugged in and connected to the
computer’s parallel or USB port before installing software from
the CD.
NOTE:
Windows 95 and Windows NT 4.0 do not support USB
connection.
1
Switch on the PC and start Windows.
NOTE:
If a window appears concerning New Hardware, select
Cancel.
2
Insert the Setup CD into the CD-ROM drive of the PC.
3
If the Xerox screen appears automatically, go to step 7.
4
From the Start menu, select [Run].
5
Type D:\XINSTALL.EXE (“D” is the letter of the CD-ROM
drive).
To Next Page
Loading...
Need help?
General
